Power Transmission Equipment

Power Transmission Equipment

The Power Transmission Equipment online mechanical maintenance training course covers belt drives, chain drives, gears and gear drives, adjustable-speed drives, shaft alignment, shaft coupling devices, and clutches and brakes. This course has no prerequisites. Power Transmission Equipment is available in online maintenance training and course manual formats.

Review a full training course list for Mechanical Systems Technician



   Looking for Live training on Mechanical Systems?

Select Format

  • Online Course & Test $85.00

Please select a format.

TPC Training is authorized by IACET to offer [0.5] CEUs for the online version of this program.

Lesson 1 - Belt Drives

Topics:

V-belts; Timing and flat belts; Sheaves; Pulleys; Installation

Learning Objectives:
– List the factors that affect the power transmitted by a belt drive.
– Name the main components of a belt drive.
– List the standard V-belt designations.
– Explain the reason for using group belts.
– Describe installation and replacement procedures for V-belts


Lesson 2 - Chain Drives

Topics:

Terminology; Roller, double-pitch, leaf, and silent chains; Cast drive chains; Sprockets; Installation

Learning Objectives:
– Explain the differences between chain drives and belt drives in transmitting power.
– Explain how a roller chain drive works.
– Describe the construction of offset roller chain.
– Explain the differences between sprocket types A, B, and C.
– List the steps in installing a chain drive.


Lesson 3 - Gears

Topics:

Gear definitions and drives; Tooth contour and diametral pitch; Spur, helical, single-, double-cut, herringbone, bevel, and worm gears; Maintenance

Learning Objectives:
– Define the following terms used to describe gear drives: pitch circle, pitch diameter, working depth, tooth face, tooth flank.
– Calculate the diametral pitch of a gear.
– List advantages and disadvantages of helical gears.
– Explain the differences between herringbone gears and double-cut helical gears.
– Define the following terms used in discussing worm gears: worm lead, worm lead angle, normal worm pitch, worm axial pitch.


Lesson 4 - Gear Drives

Topics:

Shaft-mounted, worm-gear drives; Miter-gear boxes; Gear drive installation, maintenance, and definitions; Concentric, parallel, right-angle, vertical-shaft gear drives

Learning Objectives:
– Explain how additional speed reduction can be obtained with shaft-mounted gear drives.
– Describe a worm-gear drive and a miter-gear box.
– Give a general explanation of gear drive installation and maintenance.
– Define mechanical power, thermal power, and overload capacity.
– Explain what determines the service factor of a gear drive.
– Describe a concentric-shaft gear drive and a right-angle-shaft gear drive.
– Explain how parallel-shaft gear drives are lubricated.


Lesson 5 - Adjustable-Speed Drives

Topics:

Belt- and disk-type adjustable-speed drives, Roller-type, hydraulic, and electric adjustable-speed drives

Learning Objectives:
– Identify the main criteria for selecting adjustable-speed drives for industrial plants.
– Explain the operation of a variable-speed belt drive.
– Describe how to control variable-speed drives.
– Describe the belts and chains used for variable-speed drives.
– Explain the operation of a roller-type variable-speed drive.


Lesson 6 - Shaft Alignment

Topics:

Geometry of shaft alignment; Preparation; Reverse-indicator method; Aligning multiple machines; Face-rim, long-span, and laser alignment

Learning Objectives:
– Determine the corrections needed to align two machines, using the reverse-indicator method.
– Determine the corrections needed to align two machines, using the face-rim indicator method.
– Determine the corrections needed to align three machines on a common centerline.
– Determine the corrections needed to align two machines separated by a long floating shaft.
– State at least three advantages of using laser alignment equipment over using dial indicators.


Lesson 7 - Shaft Coupling Devices

Topics:

Solid, jaw, molded-rubber, chain, gear, metal-disk, shear-pin, torque-limiting, brake-wheel, floating-shaft, spacer, insulated, and other couplings

Learning Objectives:
– List three functions usually performed by a coupling.
– Describe two types of jaw couplings.
– Name an application for molded rubber couplings.
– State an advantage of chain couplings.
– Explain the operation of a shear pin coupling.
– Describe a torque limiting coupling.
– Name an application that involves a floating shaft.
– Describe a limited end float coupling.
– List advantages and disadvantages of spacer couplings.


Lesson 8 - Clutches and Brakes

Topics:

Jaw, friction, torque-limiting, tooth-type, centrifugal-type, overrunning, electric, and fluid clutches; Friction shoe, disk, electric brakes

Learning Objectives:
– Explain the purposes of a clutch.
– Describe the operation of a friction clutch.
– Explain the need for overrunning clutches.
– Name at least one application for an electric clutch.
– Explain how a fluid clutch works.